▶▶User guides:
1.5 fast clicks on power button to turn it ON/ OFF,within 2 seconds to power on or off the battery.
2.After switch on, LED indicator light flashes 1 time.
3.Adjust the voltage: Press”+” to increase voltage, Press”-” decrease voltage.
4.Press “+” and “-” 3 seconds at the same time, the screen will rotate 180 degrees.
5.Press “power button” and “-” 3 seconds at the same time, it will appear dark screen mode.
6.Press “power button” and “-” 3 seconds at the same time, dark screen mode will be lifted.
7.When you are not vaping, please do not long press the power button.
▶▶Product parameters:
Input: 3.2–4.2V
E Cig Battery: 2500mah
Thread: 510
E Cig Tank capacity: 2.0 ml
Present coil : 0.3 ohm
Wattage: 7–80W (available to adjust in 0.1 increments)
▶▶Overheat & Safety Protection:
1.Circuit overheat protection
2.Over-inhalation protection
3.Low resistance protection
4.Automatic resistance protection
5.Short Circuit/Atomizer Protection
▶▶Friendly Note:
-Please fill the e-liquid and place it at at least 10 Minutes when you first use,then turn on to enjoy it.
-E-cigarette coil should be replaced every 7- 21 days,it depending on usage frequency. When battery screen display “new coil +” “old coil -“, press “up” “down” button based on your coil then it will works.
-Use ≧70% VG e-liquid,it can bring best vaping experience and no leakage.
-Please disassemble the tank and reinstall it again before use,to ensure that all screw threads are keeping a tight grip to avoid leak Leakage.
EAN | 689837430114 |
---|---|
brand | YumaPuff |